Trick to Complete Formatting Mobile Phone

Here is the trick for complete formatting of your virus infected or other problem arriving mobile phone...

This trick is for almost all Nokia models.

1. Switch off your phone...
2. Remove SIM card & memory chip...
3. Now press & hold keys - 3,*,call green) ...
4. Then without leaving these three buttons press power button...
5. Formatting task will be started...
6. Remember its a very rare trick....

 Yes its true its call hard format.

 key * , 3 , Call button (green) press and hold when display is on than formatting screen is displayed.

Wait for formatting to be finished,

Before carrying out this process make sure you have copied all your contacts and notes onto your Memory, because every thing will be deleted. When its finished the formatted phone may be like new, just like when u have brought it from showroom.

Hidden Secret China Mobile Phones Codes

    The following Mobile Phones codes works with various China mobile Phones such as Alkatel, Sigmatel, Carboonn, GFive, and more such China Mobile phones.
 

–Default user code : 1122, 3344, 1234, 5678
–Engineer mode : *#110*01#
–Factory mode : *#987#
–Enable COM port : *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
–Restore factory settings : *#987*99#
–LCD contrast : *#369#
–Software version : *#800#
–Software version : *#900#
–Set default language : *#0000# Send
–Set English language : *#0044# Send
–Set English language (new firmware) : *#001# Send

Pop a banner each time Windows Boots

To pop a banner which can contain any message you want to display just before a user is going to log on, go to the key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WinLogon    Now create a new string Value in the right pane named LegalNoticeCaption and enter the value that you want to see in the Menu Bar. Now create yet another new string value and name it:    LegalNoticeText Modify it and insert the message you want to display each time Windows boots. This can be effectively used to display the company's private policy each time the user logs on to his NT box.    It's .reg file would be: REGEDIT4 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Winlogon] "LegalNoticeCaption"="Caption here."

join Video Files using Command Prompt

For example if you have 3 videos in your hardrive root drive: video1.mpg, video2.mpg and video3.mpg just rename them to a, b, and c (just the letter withoug the file extension).
Example:
ren video1.mpg a
ren video2.mpg b
ren video3.mpg c
Step 2: Open Command Prompt.  Start–>Run–>type “cmd”.
Step 3: Type the location of the drive like d: or C:
Step 4: Type: Copy /b a + b + c videoname.mpg
and click enter

Step 5: Now wait till you see: 1 files copied.

And type exit and press enter. Thats it.You are done!
Note: If you want to join two files then those files must have the same extension.

advance DOS Command

APPEND
(External)

APPEND ;
APPEND [d:]path[;][d:]path[...]
APPEND [/X:on|off][/path:on|off] [/E]

Displays or sets the search path for data files. DOS will search the specified path(s) if the file is not found in the current path.

 
ASSIGN
(External)

ASSIGN x=y [...] /sta

Redirects disk drive requests to a different drive.


ATTRIB
(External)

ATTRIB [d:][path]filename [/S]
ATTRIB [+R|-R] [+A|-A] [+S|-S] [+H|-H] [d:][path]filename [/S]

Sets or displays the read-only, archive, system, and hidden attributes of a file or directory.


BACKUP
(External)

BACKUP d:[path][filename] d:[/S][/M][/A][/F:(size)] [/P][/D:date] [/T:time] [/L:[path]filename]

Makes a backup copy of one or more files. (In DOS Version 6, this program is stored on the DOS supplemental disk.)


BREAK
(Internal)

BREAK =on|off

Used from the DOS prompt or in a batch file or in the CONFIG.SYS file to set (or display) whether or not DOS should check for a Ctrl + Break key combination.


BUFFERS
(Internal)

BUFFERS=(number),(read-ahead number)

Used in the CONFIG.SYS file to set the number of disk buffers (number) that will be available for use during data input. Also used to set a value for the number of sectors to be read in advance (read-ahead) during data input operations.


CALL
(Internal)

CALL [d:][path]batchfilename [options]

Calls another batch file and then returns to current batch file to continue.


CHCP
(Internal)

CHCP (codepage)

Displays the current code page or changes the code page that DOS will use.


CHDIR
(Internal)

CHDIR (CD) [d:]path
CHDIR (CD)[..]

Displays working (current) directory and/or changes to a different directory.


CHKDSK
(External)

CHKDSK [d:][path][filename] [/F][/V]

Checks a disk and provides a file and memory status report.


CHOICE
(Internal)

CHOICE [/C[:]keys] [/N][/S][/T[:]c,nn] [text]

Used to provide a prompt so that a user can make a choice while a batch program is running.


CLS (Clear Screen)
(Internal)

CLS

Clears (erases) the screen.


COMMAND
(External)

COMMAND [d:][path] [device] [/P][/E:(size)] [/MSG][/Y [/C (command)|/K (command)]

Starts a new version of the DOS command processor (the program that loads the DOS Internal programs).


COMP
(External)

COMP [d:][path][filename] [d:][path][filename] [/A][/C][/D][/L][/N:(number)]

Compares two groups of files to find information that does not match. (See FC command).


COPY
(Internal)

COPY [/Y|-Y] [/A][/B] [d:][path]filename [/A][/B] [d:][path][filename] [/V]
or
COPY [/Y|-Y][/A][/B] [d:][path]filename+[d:][path]filename[...][d:][path][filename] [/V]

Copies and appends files.


COUNTRY
(Internal)

COUNTRY=country code,[code page][,][d:][filename]

Used in the CONFIG.SYS file to tell DOS to use country-specific text conventions during processing.


CTTY
(Internal)

CTTY (device)

Changes the standard I/O (Input/Output) device to an auxiliary device.


DATE
(Internal)

DATE mm-dd-yy

Displays and/or sets the system date.


DBLSPACE
(External)

DBLSPACE / automount=drives
DBLSPACE /chkdsk [/F] [d:]
DBLSPACE /compress d: [/newdrive=host:] [/reserve=size] [/F]
DBLSPACE /create d: [/newdrive=host:] [/reserve=size] [/size=size]
DBLSPACE /defragment [d:] ]/F]
DBLSPACE /delete d:
DBLSPACE /doubleguard=0|1
DBLSPACE /format d:
DBLSPACE [/info] [d:]
DBLSPACE /list
DBLSPACE /mount[=nnn] host: [/newdrive=d:]
DBLSPACE /ratio[=ratio] [d:] [/all]
DBLSPACE /size[=size] [/reserve=size] d:
DBLSPACE /uncompress d:
DBLSPACE /unmount [d:]

A program available with DOS 6.0 that allows you to compress information on a disk.


DEBUG
(External)

DEBUG [pathname] [parameters]

An MS-DOS utility used to test and edit programs.


DEFRAG
(External)

DEFRAG [d:] [/F][/S[:]order] [/B][/skiphigh [/LCD|/BW|/GO] [/H]
DEFRAG [d:] [/V][/B][/skiphigh] [/LCD]|/BW|/GO] [/H]

Optimizes disk performance by reorganizing the files on the disk.


DEL (ERASE)
(Internal)

DEL (ERASE) [d:][path]filename [/P]

Deletes (erases) files from disk.


DELOLDOS
(External)

DELOLDOS [/B]

Deletes all files from previous versions of DOS after a 5.0 or 6.0 installation.


DELTREE
(External)

DELTREE [/Y] [d:]path [d:]path[...]

Deletes (erases) a directory including all files and subdirectories that are in it.


DEVICE
(Internal)

DEVICE=(driver name)

Used in the CONFIG.SYS file to tell DOS which device driver to load.


DEVICEHIGH
(Internal)

DEVICEHIGH=(driver name)

Like DEVICE, DEVICEHIGH is used in the CONFIG.SYS file to tell DOS which device driver software to use for devices; however, this option is used to install the device driver into the upper memory area.


DIR
(Internal)

DIR [d:][path][filename] [/A:(attributes)] [/O:(order)] [/B][/C][/CH][/L][/S][/P][/W]

Displays directory of files and directories stored on disk.


DISKCOMP
(External)

DISKCOMP [d:] [d:][/1][/8]

Compares the contents of two diskettes.


DISKCOPY
(External)

DISKCOPY [d:] [d:][/1][/V][/M]

Makes an exact copy of a diskette.


DOS
(Internal)

DOS=[high|low],[umb|noumb]

Used in the CONFIG.SYS file to specify the memory location for DOS. It is used to load DOS into the upper memory area and to specify whether or not the upper memory blocks will be used.


DOSKEY
(External)

DOSKEY [reinstall] [/bufsize=size][/macros][/history][/insert|/overstrike] [macroname=[text]]

Loads the Doskey program into memory which can be used to recall DOS commands so that you can edit them.


DOSSHELL
(External)

DOSSHELL [/B] [/G:[resolution][n]]|[/T:[resolution][n]]

Initiates the graphic shell program using the specified screen resolution.


DRIVPARM
(Internal)

DRIVPARM= /D:(number) [/C] [/F:(form factor)] [/H:(number)] [/I][ /N][/S:(number)] [/T:(tracks)]

Used in the CONFIG.SYS file to set parameters for a disk drive.


ECHO
(Internal)

ECHO on|off
ECHO (message)

Displays messages or turns on or off the display of commands in a batch file.


EDIT
(External)

EDIT [d:][path]filename [/B][/G][/H][/NOHI]

Starts the MS-DOS editor, a text editor used to create and edit ASCII text files.


EMM386
(External)

EMM386 [on|off|auto] [w=on|off]

Enables or disables EMM386 expanded-memory support on a computer with an 80386 or higher processor.


EXE2BIN
(External)

EXE2BIN [d:][path]filename [d:][path]filename

Converts .EXE (executable) files to binary format.


EXIT
(Internal)

EXIT

Exits a secondary command processor.


EXPAND
(External)

EXPAND [d:][path]filename [[d:][path]filename[ . . .]]

Expands a compressed file.


FASTHELP
(External)

FASTHELP [command][command] /?

Displays a list of DOS commands with a brief explanation of each.


FASTOPEN
(External)

FASTOPEN d:[=n][/X]

Keeps track of the locations of files for fast access.


FC
(External)

FC [/A][/C][/L][/Lb n][/N][/T][/W][number] [d:][path]filename [d:][path]filename

or (for binary comparisons)
FC [/B][/number] [d:][path]filename [d:][path]filename

Displays the differences between two files or sets of files.


FCBS
(Internal)

FCBS=(number)

Used in the CONFIG.SYS file to specify the number of file-control blocks for file sharing.


FDISK
(External)

FDISK [/status]

Prepares a fixed disk to accept DOS files for storage.


FILES
(Internal)

FILES=(number)

Used in the CONFIG.Sys file to specify the maximum number of files that can be open at the same time.


FIND
(External)

FIND [/V][/C][/I][/N] ÒstringÓ [d:][path]filename[...]

Finds and reports the location of a specific string of text characters in one or more files.


FOR
(Internal)

FOR %%(variable) IN (set) DO (command)

or (for interactive processing)
FOR %(variable) IN (set) DO (command)

Performs repeated execution of commands (for both batch processing and interactive processing).


FORMAT
(External)

FORMAT d:[/1][/4][/8][/F:(size)] [/N:(sectors)] [/T:(tracks)][/B|/S][/C][/V:(label)] [/Q][/U][/V]

Formats a disk to accept DOS files.


GOTO
(Internal)

GOTO (label)

Causes unconditional branch to the specified label.


GRAFTABL
(External)

GRAFTABL [(code page)]
GRAFTABL [status]

Loads a table of character data into memory (for use with a color/graphics adapter).


GRAPHICS
(External)

GRAPHICS [printer type][profile] [/B][/R][/LCD][/PB:(id)] [/C][/F][/P(port)]

Provides a way to print contents of a graphics screen display.


HELP
(External)

HELP [command] [/B][/G][/H][/NOHI]

Displays information about a DOS command.


IF
(Internal)

IF [NOT] EXIST filename (command) [parameters]
IF [NOT] (string1)==(string2) (command) [parameters]
IF [NOT] ERRORLEVEL (number) (command) [parameters]

Allows for conditional operations in batch processing.


INCLUDE
(Internal)

INCLUDE= blockname

Used in the CONFIG.SYS file to allow you to use the commands from one CONFIG.SYS block within another.


INSTALL
(Internal)

INSTALL=[d: ][\path]filename [parameters]

Used in the CONFIG.SYS file to load memory-resident programs into conventional memory.


INTERLINK
(External)

INTERLINK [client[:]=[server][:]]

Connects two computers via parallel or serial ports so that the computers can share disks and printer ports.


INTERSVR
(External)

INTERSVR [d:][...][/X=d:][...] [/LPT:[n|address]] [/COM:[n|address]][/baud:rate] [/B][/V]
INTERSVR /RCOPY

Starts the Interlink server.


JOIN
(External)

JOIN d: [d:path]
JOIN d: [/D]

Allows access to the directory structure and files of a drive through a directory on a different drive.


KEYB
(External)

KEYB [xx][,][yyy][,][d:][path]filename [/E][/ID:(number)]

Loads a program that replaces the support program for U. S. keyboards.

LABEL
(External)

LABEL [d:][volume label]

Creates or changes or deletes a volume label for a disk.

LASTDRIVE
(Internal)

LASTDRIVE=(drive letter)

Used in the CONFIG.SYS file to set the maximum number of drives that can be accessed.

LOADFIX
(Internal)

LOADFIX [d:][path]filename [parameters]

Ensures that a program is loaded above the first 64K of conventional memory, and runs the program.

LOADHIGH
(Internal)

LOADHIGH (LH) [d:][path]filename [parameters]

Loads memory resident application into reserved area of memory (between 640K-1M).


MEM
(External)

MEM [/program|/debug|/classify|/free|/module(name)] [/page]

Displays amount of installed and available memory, including extended, expanded, and upper memory.


MEMMAKER
(External)

MEMMAKER [/B][/batch][/session][/swap:d] [/T][/undo][/W:size1,size2]

Starts the MemMaker program, a program that lets you optimize your computer's memory.


MENUCOLOR
(Internal)

MENUCOLOR=textcolor,[background]

Used in the CONFIG.SYS file to set the colors that will be used by DOS to display text on the screen.


MENUDEFAULT
(Internal)

MENUDEFAULT=blockname, [timeout]

Used in the CONFIG.SYS file to set the startup configuration that will be used by DOS if no key is pressed within the specified timeout period.


MENUITEM
(Internal)

MENUITEM=blockname, [menutext]

Used in the CONFIG.SYS file to create a start-up menu from which you can select a group of CONFIG.SYS commands to be processed upon reboot.


MIRROR
(External)

MIRROR [d:]path [d:] path [...]
MIRROR [d1:][d2:][...] [/T(drive)(files)] [/partn][/U][/1]

Saves disk storage information that can be used to recover accidentally erased files.


MKDIR
(MD) (Internal)

MKDIR (MD) [d:]path

Creates a new subdirectory.



MODE
(External)

MODE n
MODE LPT#[:][n][,][m][,][P][retry]
MODE [n],m[,T]
MODE (displaytype,linetotal)
MODE COMn[:]baud[,][parity][,][databits][,][stopbits][,][retry]
MODE LPT#[:]=COMn [retry]
MODE CON[RATE=(number)][DELAY=(number)]
MODE (device) CODEPAGE PREPARE=(codepage) [d:][path]filename
MODE (device) CODEPAGE PREPARE=(codepage list) [d:][path]filename
MODE (device) CODEPAGE SELECT=(codepage)
MODE (device) CODEPAGE [/STATUS]
MODE (device) CODEPAGE REFRESH

Sets mode of operation for devices or communications.


MORE
(External)

MORE < (filename or command)
(name)|MORE

Sends output to console, one screen at a time.



MOVE
(Internal)

MOVE [/Y|/-Y] [d:][path]filename[,[d:][path]filename[...]] destination

Moves one or more files to the location you specify. Can also be used to rename directories.



MSAV
(External)

MSAV [d:] [/S|/C][/R][/A][/L][/N][/P][/F][/video][/mouse]
MSAV /video

Scans your computer for known viruses.



MSBACKUP
(External)

MSBACKUP [setupfile] [/BW|/LCD|/MDA]

Used to backup or restore one or more files from one disk to another.



MSCDEX
(External)

MSCDEX /D:driver [/D:driver2. . .] [/E][/K][/S][/V][/L:letter] [/M:number]

Used to gain access to CD-ROM drives (new with DOS Version 6).



MSD
(External)

MSD [/B][/I]
MSD [/I] [/F[d:][path]filename [/P[d:][path]filename [/S[d:][path]filename

Provides detailed technical information about your computer.



NLSFUNC
(External)

NLSFUNC [d:][path]filename

Used to load a file with country-specific information.



NUMLOCK
(Internal)

NUMLOCK=on|off

Used in the CONFIG.SYS file to specify the state of the NumLock key.



PATH
(Internal)

PATH;
PATH [d:]path[;][d:]path[...]

Sets or displays directories that will be searched for programs not in the current directory.



PAUSE
(Internal)

PAUSE [comment]

Suspends execution of a batch file until a key is pressed.



POWER
(External)

POWER [adv:max|reg|min]|std|off]

Used to turn power management on and off, report the status of power management, and set levels of power conservation.



PRINT
(External)

PRINT [/B:(buffersize)] [/D:(device)] [/M:(maxtick)] [/Q:(value] [/S:(timeslice)][/U:(busytick)] [/C][/P][/T] [d:][path][filename] [...]

Queues and prints data files.



PROMPT
(Internal)

PROMPT [prompt text] [options]

Changes the DOS command prompt.



RECOVER
(External)

RECOVER [d:][path]filename
RECOVER d:

Resolves sector problems on a file or a disk. (Beginning with DOS Version 6, RECOVER is no longer available ).



REM
(Internal)

REM [comment]

Used in batch files and in the CONFIG.SYS file to insert remarks (that will not be acted on).



RENAME (REN)
(Internal)

RENAME (REN) [d:][path]filename [d:][path]filename

Changes the filename under which a file is stored.



REPLACE
(External)

REPLACE [d:][path]filename [d:][path] [/A][/P][/R][/S][/U][/W]

Replaces stored files with files of the same name from a different storage location.



RESTORE
(External)

RESTORE d: [d:][path]filename [/P][/S][/B:mm-dd-yy] [/A:mm-dd-yy][/E:hh:mm:ss] [/L:hh:mm:ss] [/M][/N][/D]

Restores to standard disk storage format files previously stored using the BACKUP command.



RMDIR (RD)
(Internal)

RMDIR (RD) [d:]path

Removes a subdirectory.



SCANDISK
(External)

SCANDISK [d: [d: . . .]|/all][/checkonly|/autofix[/nosave]|/custom][/surface][/mono][/nosummay]
SCANDISK volume-name[/checkonly|/autofix[/nosave]|/custom][/mono][/nosummary]
SCANDISK /fragment [d:][path]filename
SCANDISK /undo [undo-d:][/mono]

Starts the Microsoft ScanDisk program which is a disk analysis and repair tool used to check a drive for errors and correct any problems that it finds.



SELECT
(External)

SELECT [d:] [d:][path] [country code][keyboard code]

Formats a disk and installs country-specific information and keyboard codes (starting with DOS Version 6, this command is no longer available).



SET
(Internal)

SET (string1)=(string2)

Inserts strings into the command environment. The set values can be used later by programs.


SETVER
(External)

SETVER [d:]:path][filename (number)][/delete][/quiet]

Displays the version table and sets the version of DOS that is reported to programs.



SHARE
(External)

SHARE [/F:space] [/L:locks]

Installs support for file sharing and file locking.



SHELL
(Internal)

SHELL=[d:][path]filename [parameters]

Used in the CONFIG.SYS file to specify the command interpreter that DOS should use.



SHIFT
(Internal)

SHIFT

Increases number of replaceable parameters to more than the standard ten for use in batch files.



SORT
(External)

SORT [/R][/+n] < (filename)
SORT [/R][/+n] > (filename2)

Sorts input and sends it to the screen or to a file.



STACKS
(Internal)

STACKS=(number),(size)

Used in the CONFIG.SYS file to set the number of stack frames and the size of each stack frame.



SUBMENU
(Internal)

SUBMENU=blockname, [menutext]

Used in the CONFIG.SYS file to create a multilevel menu from which you can select start-up options.



SUBST
(External)

SUBST d: d:path
SUBST d: /D

Substitutes a virtual drive letter for a path designation.



SWITCHES
(Internal)

SWITCHES= [/K][/F][/N][/W]

Used in the CONFIG.SYS file to configure DOS in a special way; for example, to tell DOS to emulate different hardware configurations.



SYS
(External)

SYS [source] d:

Transfers the operating system files to another disk.



TIME
(Internal)

TIME hh:mm[:ss][.cc][A|P]

Displays current time setting of system clock and provides a way for you to reset the time.



TREE
(External)

TREE [d:][path] [/A][/F]

Displays directory paths and (optionally) files in each subdirectory.



TYPE
(Internal)

TYPE [d:][path]filename

Displays the contents of a file.



UNDELETE
(External)

UNDELETE [d:][path][filename] [/DT|/DS|/DOS]
UNDELETE [/list|/all|/purge[d:]|/status|/load|/U|/S[d:]|/Td:[-entries]]

Restores files deleted with the DELETE command.



UNFORMAT
(External)

UNFORMAT d: [/J][/L][/test][/partn][/P][/U]

Used to undo the effects of formatting a disk.



VER
(Internal)

VER

Displays the DOS version number.



VERIFY
(Internal)

VERIFY on|off

Turns on the verify mode; the program checks all copying operations to assure that files are copied correctly.



VOL
(Internal)

VOL [d:]

Displays a disk's volume label.



VSAFE
(External)

VSAFE [/option[+|-]...] [/NE][/NX][Ax|/Cx] [/N][/D][/U]

VSAFE is a memory-resident program that continuously monitors your computer for viruses and displays a warning when it finds one.



XCOPY
(External)

XCOPY [d:][path]filename [d:][path][filename] [/A][/D:(date)] [/E][/M][/P][/S][/V][/W][Y\-Y]
Copies directories, subdirectories, and files.



Syntax Notes

To be functional, each DOS command must be entered in a particular way: this command entry structure is known as the command's "syntax." The syntax "notation" is a way to reproduce the command syntax in print.

For example, you can determine the items that are optional, by looking for information that is printed inside square brackets. The notation [d:], for example, indicates an optional drive designation. The command syntax, on the other hand, is how YOU enter the command to make it work.


Command Syntax Elements
1. Command Name

The DOS command name is the name you enter to start the DOS program (a few of the DOS commands can be entered using shortcut names). The DOS command name is always entered first. In this book, the command is usually printed in uppercase letters, but you can enter command names as either lowercase or uppercase or a mix of both.

2. Space

Always leave a space after the command name.

3. Drive Designation

The drive designation (abbreviated in this book as "d:") is an option for many DOS commands. However, some commands are not related to disk drives and therefore do not require a drive designation. Whenever you enter a DOS command that deals with disk drives and you are already working in the drive in question, you do not have to enter the drive designator. For example, if you are working in drive A (when the DOS prompt A> is showing at the left side of the screen) and you want to use the DIR command to display a directory listing of that same drive, you do not have to enter the drive designation. If you do not enter a drive designation, DOS always assumes you are referring to the drive you are currently working in (sometimes called the "default" drive).

4. A Colon

When referring to a drive in a DOS command, you must always follow the drive designator with a colon (:) (this is how DOS recognizes it as a drive designation).

5. Pathname

A pathname (path) refers to the path you want DOS to follow in order to act on the DOS command. As described in Chapter 3, it indicates the path from the current directory or subdirectory to the files that are to be acted upon.

6. Filename

A filename is the name of a file stored on disk. As described in Chapter 1, a filename can be of eight or fewer letters or other legal characters.

7. Filename Extension

A filename extension can follow the filename to further identify it. The extension follows a period and can be of three or fewer characters. A filename extension is not required.

8. Switches

Characters shown in a command syntax that are represented by a letter or number and preceded by a forward slash (for example, "/P") are command options (sometimes known as "switches"). Use of these options activate special operations as part of a DOS command's functions.

9. Brackets

Items enclosed in square brackets are optional; in other words, the command will work in its basic form without entering the information contained inside the brackets.

10. Ellipses

Ellipses (...) indicate that an item in a command syntax can be repeated as many times as needed.

11. Vertical Bar

When items are separated by a vertical bar (|), it means that you enter one of the separated items. For example: ON | OFF means that you can enter either ON or OFF, but not both

My first virus in using c

This is a simple program to create a virus in c
It will create Folder in a Folder in a Folder and so on .....


  http://www.ziddu.com/download/13544148/folder.txt.html

 download  the  link  copy the program  in c and run it.




i cannot type  the program here because google blocking it.

Free Bsnl Gprs To Access Internet

U Can Surf For Free Via Gprs On Pc Too I came to know of using BSNL GPRS for FREE with FULL ACCESS to All Sites. Here is the way. 1.Create 2 connections with different names like "BSNL PORTAL" and "CELLONE PORTAL" with following settings.   Access Point Name- "celloneportal" Proxy Service Address- "192.168.51.163" Proxy Port- "8080" Security- "NORMAL"

Rest fields to be as it is.

2.now open phone's default inbuilt browser and select any of the two settings created to access the web.you will now access only bsnl's home site.

3.now keep browser working and open another browser for full internet access like opera or netfront.in these browsers use the second setting created. make sure to use second setting this time. connect to open a page. you get an error message like "ACCESS DENIED" but you don't worry.

4.keep both browsers working in background and open connection manager. in connection manager just disconnect the connection that is not working like the second one you used to connect opera or net front.

5.again open opera or netfront from background and this time use the first connection that you are using to connect with default inbuilt browser to connect to internet.

6.sure this time you are connected with full access.

OLD TRICK  YOU CAN TRY NOT SURE IT WILL WORK

Top Essential Google Search shortcuts

#1: Get Local Weather

Type: “weather [city name or zip/postal code]”                                                                     Example: “weather 700000″ or “weather kolkata”

#2: Check Flight Status

Google automagically pulls flight data from FlightStats.com. All you have to do is enter the flight number.                                                                                                                                                           Type: [flight name and/or number]                                                                                     Example: “ic254"

#3: Convert Distances

Type: “[value] [first distance unit] to [second distance unit]”                                              Example: “100 kilometers to miles”

#4: Find a Phone Number

Find a Person:

    Type: “[person’s name], [city or zip/postal code]”                                                           Example: “pallab paul, kolkata”

Find a Business/store:

    Type: “[business name or type], [city or zip/postal code]”                                         Example: “book store, kolkata”

GOOGLE OPERATOR

Type the following highlited words in google search box.

Google has several google operators that can help you find specific information, specific websites or inquire about the indexing of your own   site, below you will find the most important ones:    

define: - This google operator will find definitions for a certain term or  word over the Internet. Very useful when you come across a strange word when writing a post. I use this as a google dictionary. example : (define computer)

info: - The google info operator will list the sets of information that    Google has from a specific website (i.e. info:http://www.pallabpaul.blogspot.com)

site: - This google operator can be used to see the number of indexed     pages on your site (i.e.site:www.pallabpaul.blogspot.com).                  Alternative it can also be used to search for information inside a specific        site or class of sites.

link: - This google link operator allows you to find backlinks pointing         to your site. Unfortunately the count is not updated frequently and             not all backlinks are shown

allinurl: - Using this Google operator will limit the search to results         that contain the desired keywords on the URL structure. (i.e. allinurl:blogtips)

fileformat: - Useful Google operator for finding specific file formats. Sometimes you know that the information you are looking for is likely to be contained in a PDF document or on a PowerPoint presentation, for instance. (i.e. “fileformat:.pdf market research” will search for PDF documents that contain the terms “market” and “research”)

 

Funny Computer Trick

Copy and paste the java script code to the address bar of your browser 

javascript:function Shw(n) {if (self.moveBy) {for (i = 35; i > 0; i--) {for (j = n; j > 0; j--) {self.moveBy(1,i);self.moveBy(i,0);self.moveBy(0,-i);self.moveBy(-i,0); } } }} Shw(6)

AND



javascript:a=0;x=0;y=0;setInterval("a+=.01;x=Math.cos(a*3)*200;y=Math.sin(a*2)*2;moveBy(x,y)",2);void(0) 

Hack Orkut Account(Funny)

Well, I am not a hacker in anyway, and the trick below is simply meant for fun.  I only displayed a message box stating that your Orkut Account is hacked.

         Simply Copy and paste the following code in the address bar and press enter.

javascript:function reverse() { var inp = " ! dekcah si tnuocca tukrO ruoY "; var outp="";for (i = 0; i <= inp.length; i++) { outp =inp.charAt (i) + outp;}alert(outp) ;}; reverse();

Multi Google Talk Login without any software

Just follow the simple steps Below:
1) Right click on the Google Talk shortcut.
2) click on Properties.
3) Go to Shortcut tab on Google Talk Properties window.
4) On the Target textbox, add in the /nomutex to the end of the line so that it looks like below (or you can simply copy and paste the below syntax and replace the original).
“c:\program files\google\google talk\googletalk.exe” /nomutex
5) Click on OK.
  I didn't have to do anything after this and clicking on the shortcut multiple times just gave me different Google talk window.

Alternative

To create a new shortcut for Google Talk:

1) Right-click on the desktop or anywhere you want to place the GTalk shortcut.
2) Select New on the right click context menu.
3) Then select Shortcut.
4) Copy and paste the following line to the text box when prompted to type the location of the item:
“c:\program files\google\google talk\googletalk.exe” /nomutex

5) Click on Next.
6) Give the shortcut a proper name such as Google Talk or Google
Talk Multiple or Google Talk Polygamy.
7) Click OK until you are done.

Private Character Editor

Used for editing fonts,etc.
** start>>Run
** Now, type eudcedit

iExpress

Used to create SetupsYou can create your own installers !
** start>>Run
** Now, type iexpress

Trick to Show Your name after time in taskbar...

Try this  trick to add up ur name in place of AM and PM beside time
Its simple
Step-1:- Navigate to -> Start -> Control Pannel -> Regional and Language Option -> Click on Customize -> Go to TIME Tab -> Change AM symbol and PM symbol from AM and PM to ur name -> Apply -> Ok ...
Did It change? If not, follow step-2 below.

Step2:- Now go to time in taskbar and Double Click it to open "Date and time property" ...Look place where time changes in digital form i.e. 02:47:52 AM , click to arrow to cnage the AM or PM by selecting and press arrow. It will Show ur name or name that was entered by u, Apply -> OK and be HAPPY 8)

Top 20 Tips To Keep Your System Faster

Follow these tips and you will definitely have a much faster and more reliable PC!

 1. Wallpapers: They slow your whole system down, so if you're willing to compromise, have a basic plain one instead!

2. Drivers: Update your hardware drivers as frequently as possible.  New drivers tend to increase system speed especially in the case of graphics cards, their drivers are updated by the manufacturer very frequently!

3. Minimizing: If you want to use several programs at the same time then minimize those you are not using.  This helps reduce the overload on RAM.

4. Boot Faster: The 'starting Windows 98/XP' message on startup can delay your booting for a couple of seconds.  To get rid of this message go to c:\ and find the file Msdos.sys.  Remove the Read-Only option.  Next, open it in Notepad or any other text editor.  Finally, go to the text 'Options' within the file and make the following changes: Add BootDelay=0.  To make your booting even faster, set add Logo=0 to remove the Windows logo at startup.

5. Restart only Windows: When restarting your PC, hold down Shift to only restart Windows rather than the whole system which will only take a fraction of the time.

6. Turn Off Animations:  Go to Display Settings from the Control Panel and switch to the Effects Tab. Now turn off Show Windows Content While Dragging and Smooth Edges on Screen Fonts.  This tip is also helpful with Windows XP because of the various fade/scroll effects.

7. Faster Start-Menu Access: Go to the Start menu and select Run.  Now type Regedit and hit Enter.  The Registry Editor will appear on the screen.  Now, open the folder HKEY_CURRENT_USER\Control Panel\Desktop.  You should see a MenuShowDelay value.  If you don't then do the following: right click on a blank space in the right pane and select New\String.  Change the name in the new value to MenuShowDelay.  Now that we have the MenuShowDelay value, double click on it and enter 0 in the value data field.  This sets the start menu delay to 0 milliseconds.

8. Resolutions: If you are willing to do anything for faster performance from your PC, then try lowering your display resolution.  The lower it is, the faster your PC.

9. Turn off Active Desktop:  Go to your Display Properties and switch to the Web tab.  Uncheck View My Active Desktop As a Web Page.  Since the Active Desktop option under Windows 98 uses a lot of system resources, this option can have a dramatic effect on the speed of the whole system.

10. Defragment Often:  Windows 98's Defrag tool uses Application Acceleration from Intel which means that when you defragment your drive, data is physically arranged on the drive so that applications will load faster.

11. Take your PC to Bed:  Using the Advanced Power Management feature under Windows 98 gives you the option to use the sleep command.  That way, you can send your PC to sleep instead of shutting it down and then restarting it.  It's as simple as pressing a button and then pressing the same button to wake it up.  You can tell Windows after how many minutes/hours of inactivity to automatically sleep the machine in the Advanced Power Management section of the Control Panel.

12. Faster Internet Access: If you use the internet for reference and the sites you visit are rarely  updated then try the following.  In IE (the same can be done in Netscape) go to Tools, Internet Options.  Next, click on Settings... in the Temporary Internet Files  section.  Finally, select Never for the first option and double the amount of storage space to use, click OK!

13. Benchmarking: Benchmarking can be very useful when run frequently.  It can tell you how your PC's components are performing and then compare them to other machines like yours.  For example, when you overclock your PC, you want to know how much more speed you have and whether it is stable.  All this and more can be discovered using benchmarking.  An excellent piece of software for doing this job is SiSoft Sandra which can be found in the Downloads File Archive!

14. Refresh the Taskbar without restarting: If you in some way change the taskbar, either in Regedit or elsewhere, you can refresh the task bar without restarting.  Hold down Ctrl Alt Del, and double click on Explorer.  Say Yes to close Explorer, but no to closing Windows.  This will refresh the Taskbar and system tray.

15. Quick CD Eject: Instead of pushing the button on your drive, right-click your CD drive letter in My Computer and click on Eject.  This will also remove any icons that have become associated with the CD drive.

16. Start Up Programs:  Windows can be slowed down when programs run on start up.  To eliminate this, check your Start up folder.  You can access it from the start menu: Start, Programs, Start Up.  Another way to eliminate programs from loading even before Windows actually starts is by doing the following: Click on Start, then Run.  Type msconfig.  It will take quite a long time for this program to load, but when you finally see it on your screen, explore the different tabs.  They all have to do with how quickly your PC boots, so select what you want, and uncheck what you don't want!

17. Fonts: When Windows starts, it loads every single font in the Fonts folder.  Therefore, the more fonts you have, the slower the booting process.  To get rid of unwanted fonts, simply go to the Fonts folder under c:\windows and remove whatever you don't want.  Fonts that have a red letter 'A' as their icon are system fonts, so don't delete them.

18. Stretching Wallpapers:  Don't "stretch" your wallpaper in Windows 98 since it actually slows Windows down when you drag icons around on the desktop.

19. RAM Matters: If you have less than 32MB then you should seriously think of upgrading it to at least 64MB.  Windows runs much more smoothly with 64MB or higher and tends to use less hard disk space for virtual memory.

20. Partitioning: A very nice little thing you can do to boost system performance.  By partitioning your hard drive, splitting one physical drive into several logical ones, you can gain several advantages.  1. If you get a virus or you accidentally format a drive, not all will be lost.  2. By placing the swap file (Win386.swp) on a separate drive, The swap file will be less fragmented and thus, faster. 3. Place Windows on a separate drive and whenever you need to reinstall it, you rest assured that your data is safe on a separate drive.  Partitioning can be done using a few programs such as FDisk which comes with DOS.  However, FDisk formats everything on the hard disk before partitioning. Alternatively, you can use Partition Magic from Power Quest to partition your hard disk without losing your data.